Just Reset - Universal 7 pin Chip Re-setter For use with Epson ink cartridges with 7 Contact Chips

The Just Reset Zap-It device is required for any Epson® cartridges that are equipped with the Intellidge® Chip. Once activated, The Zap-It will Re-program the chip on the cartridge, telling it to show a "full" level of ink. You can also use the Zap-It to enable you to effectively use up all the ink in your cartridge. How to use the Just Reset Zap-It device: 1. Hold the Zap-It, so that the two (green & red) lights are facing upwards. 2. Turn the cartridge upside down so that the outlet holes are also facing upwards. 3. Locate the cartridge into the appropriate slots of the Zap-It. This should locate the prongs from the Zap-It against the chip. (You will need to use the L shape lug, which detaches from the Zap-It for the C70, C80, C82 & 5200). 4. Push the cartridge and the Zap-It together.(See illustration below) 5. Both lights will flash once simultaneously, then the green light will flash five times to show that chip is reprogrammed. 6. If the red light flashes it may mean either, the prongs are not in line with the chip, or the cartridge you are reprogramming is not an original Epson® or a JR Inkjet Compatible. 7. You may now proceed with refilling your cartridge as per instructions in your refill kit.